Blog

  • What Should You Avoid Doing in a Luxury Massage Bathtub?
    The luxury massage bathtub relies on jet nozzles and a circulating water system to achieve the massage effect. When the bath liquid produces a lot of foam, the foam can easily enter the nozzle pipes, causing blockages in the air pump or water pump, affecting the normal operation of the device.
    2026-03-09
  • What should you balance first in a jacuzzi massage bathtub?
    Total Alkalinity (TA) – The First Step to Balancing Total alkalinity measures water's buffering capacity against pH changes; it can also be understood as the "foundation of water quality stability." • Ideal Range: 80–120 ppm. If alkalinity is too low, pH will fluctuate frequently; if alkalinity is too high, pH adjustment will become difficult.
    2025-11-14
  • Are acrylic spa massage bathtubs prone to cracking?
    Theoretically, it's not prone to breakage. Under qualified production conditions, acrylic spa massage bathtubs exhibit the following properties: · Excellent impact resistance: over 10 times greater than ordinary glass; · Excellent elasticity · Flexible support structure · High-temperature stability
    2025-09-08
  • Will an air massage bathtub get moldy if left unused for a long time?
    After use, air massage bathtubs may retain a small amount of moisture in the pipes, air bubble nozzles, and bottom. If left undrained for a long time, especially if there's a trace of accumulated water inside the air ducts, it can become a breeding ground for mold. This type of mold is often black or green.
    2025-08-26
  • How to Clean a Hydromassage Bathtub?
    Water Massage Bathtub Deep Cleaning Process (Recommended Monthly) Step 1: Prepare tools and cleaning solution Step 2: Fill with water and mix with the solution Step 3: Run the water massage system for 10-15 minutes Step 4: Turn off the system and let it soak for 15-30 minutes Step 5: Run the system again for 5 minutes Step 6: Drain and rinse thoroughly Step 7: Clean the tub and jets
    2025-08-25
  • Can I use bleach on an acrylic massage bathtub?
    — Traditional chlorine-based bleach is not recommended for use on acrylic massage bathtubs. The main reasons include: 1. Corrosion, tarnishing, and discoloration of the acrylic massage bathtub surface; 2. Damage to the electronic control system and seals; 3. Potential irritation or harm to the human body; 4. A variety of safe and effective alternative cleaning solutions are available on the market that fully meet daily cleaning needs.
    2025-08-19

Get the latest price? We will reply as soon as possible (within 12 hours)

0.426622s